Page 1 of 1
Front Suspension Specs
Posted: Thu Mar 21, 2013 5:05 pm
by VegeKev
G'day All,
Does anyone have the specifications and wear limits for the leading arm bushes, pivots and bolts?
The manual mentions checking the sizes but doesn't list them....
I'm specifically after the OD of the bolts that hold the springs onto the middle of the front arms. The ones I've got range from 0.390" to 0.381"....nearly 10 thou taper!.....wondering what sort of clearance they are supposed to have.
I'm assuming similar to the rear pivots?
Thanks heaps,
Kev.
Posted: Fri Mar 22, 2013 6:24 am
by Sam Green
Nothing in my info Kev, only the spring specs.
It makes that complete front end set all the more like a good buy.
Sam.
Posted: Fri Mar 22, 2013 6:57 am
by Larzfromarz
If this is the part you are looking for 90147-205-010 (item 18) I found several on eBay (US) and I'd expect it is available as NOS from some place like Western Hills Honda or others. I'd just replace it if in doubt.
Posted: Fri Mar 22, 2013 2:31 pm
by VegeKev
Thanks for the replies Gentlemen,
Yes Sam, that complete set is looking more and more like a good buy.
No Larz, the bolt I'm checking is No. 19 in the schematic. My rear pivot bolts are in fine nick...maybe been replaced before.
Only one set on evilbay at the moment appear to have these bolts included. Heaps of the No. 18's.
Cheers,
Kev
Posted: Fri Mar 22, 2013 2:43 pm
by Larzfromarz
Yeah I should have read your post more carefully- you described it perfectly.
Posted: Fri Mar 22, 2013 2:47 pm
by VegeKev
I should have posted a piccie
I'm just bucking at spending US$85.00 for two wee bolts !
Kev.
Posted: Fri Mar 22, 2013 3:03 pm
by Sam Green
VegeKev wrote:I should have posted a piccie
I'm just bucking at spending US$85.00 for two wee bolts !
Kev.
You should have bought the full kit Kev, it went for £36 + £4 post to OZ.
http://finance.yahoo.com/currency-conve ... AUD;amt=40
Sam.
Posted: Fri Mar 22, 2013 3:37 pm
by Spokes
I have a pair of good used #19's. .389"-.390" each From a CA95. I would imagine that these would fit. PM if interested with an address. Shipping cost only.
Posted: Sun Mar 24, 2013 4:48 pm
by VegeKev
Hey,
You wouldn't believe it, but the bolts I need were advertised this morning on eBay!.....bit scary really.....is somebody watching me?
Kev.
Posted: Sun Mar 24, 2013 5:17 pm
by Spokes
No fear Kev. I think the Chicoms(chinese communists) read all of the bike forums and try to market what we may be intrested in. Glad you found your part.