Page 1 of 1

Yet another (I'm sure) petcock question

Posted: Sat Oct 20, 2012 6:29 pm
by Rocketsled
My CA95's got a complete fuel petcock....alas, 1/3 or the parts are rusty blobs.

I managed to drill out the screws and separate the components...the problem I have is: I don't think one of the parts that needs replacing is included in the rebuild kit... (#6 on the illustation here: http://www.examiner.com/article/vintage-honda-petcocks )

I can't find a part number, and thus don't have the first clue where to start looking.

Posted: Sat Oct 20, 2012 8:34 pm
by Rocketsled
For the search engines, it's 16954-250-000, and it's available all over.

Posted: Sun Oct 21, 2012 3:16 pm
by Larzfromarz
It's no fun when you answer your own posts!

Posted: Sun Oct 21, 2012 5:18 pm
by Rocketsled
Larzfromarz wrote:It's no fun when you answer your own posts!


I actually didn't. The guy from the examiner (Mr. Honda) replied back to me! :D
I was just closing the loop in case someone else had the same problem.

Posted: Sun Oct 21, 2012 5:59 pm
by Larzfromarz
Good you found it!

Posted: Sun Oct 21, 2012 6:22 pm
by Rocketsled
Itpays to look around. The first Ebay hit was for $38 + shipping....I found 'em for $7 elsewhere by just blind googling the part number.

Posted: Sat Oct 27, 2012 2:01 am
by frappy
Rocketsled wrote:Itpays to look around. The first Ebay hit was for $38 + shipping....I found 'em for $7 elsewhere by just blind googling the part number.



From whom did you end up buying this part? I need 3 and could sure use to save a couple bucks! Thank you.

Posted: Sat Oct 27, 2012 7:29 am
by Rocketsled
I haven't yet (that's in next month's budget) But here are my notes:

http://www.westernhillshondayamaha.com
16954-250-000 $6.92

gearhead.com
16954-250-000 $6.92

http://www.ktmpartspitstop.com/ (out of stock)
$5.54

http://www.atvhondaparts.com/ $5.64

Posted: Wed Oct 31, 2012 2:34 pm
by frappy
I called Western Hills Honda and they don't have it and can't get it. They have a nationwide parts locator and nothing showed up there either. I think we'll get the same answer from the other suppliers you have listed. Thus, I'm going to get mine from http://www.ebay.com/itm/230649336187?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 unless someone here on the fourm can recommed a better-priced supplier. I need 3, so at least I'll be saving a bit on shipping. I might buy some other needed CA95 stuff from this supplier as well...!

Posted: Wed Oct 31, 2012 2:40 pm
by Spokes
sorry to chime in late on this one. Yes, get this item from the ebay seller listed. You cannot find this part stateside. I keep using the old ones I find.

Posted: Wed Oct 31, 2012 2:46 pm
by comp_wiz101
I had a look through my petcock parts, but that was the one bit I didn't have - sorry.

Posted: Wed Oct 31, 2012 9:23 pm
by frappy
Spokes:
Thanks for the advice.

compwiz_101:
Thanks for checking.

I'll be ordering three (3) of these plus some other stuff from our good friend in Thailand!

Posted: Tue Nov 06, 2012 4:29 pm
by Rocketsled
frappy wrote:Spokes:
Thanks for the advice.

compwiz_101:
Thanks for checking.

I'll be ordering three (3) of these plus some other stuff from our good friend in Thailand!


Yeah, I'm finding the same. Which is wierd because it's not just a CA95 part, it was used on a number of models for a number of years.