FourWheelForum  

Go Back   FourWheelForum > Motorcycles & Streetbikes! > The Honda CA95 / Benly 150 Restoration

The Honda CA95 / Benly 150 Restoration The little brother to the CA160 in our family of Hondas

Reply
Thread Tools
  #1  
Unread 04-25-2020, 06:23 PM
Dave swMN Dave swMN is offline
Member
 
Join Date: Jan 2011
Location: sw Minnesota (Okabena)
Posts: 34
Default Clutch discs sticking

Don't ride my rebuilt CA95 much but finally go around to adjusting everything so now it starts very good and runs good so will use it more. Over the past few years this clutch discs would stick a little and I could rock the bike back and forth and they would release. Yesterday drove it about 10 miles and today the discs are stuck and can't get them to release. I had put it new discs. What causes this and what might I need to do to get them to release and what can I do to prevent this in the future?
Reply With Quote
  #2  
Unread 04-27-2020, 03:25 PM
rhodemon rhodemon is offline
Member
 
Join Date: Jun 2009
Posts: 42
Default

Holy Moly there is action on the CA95 Forum!!! Its only been years since the last post and here I thought it was all over. I've only been into the clutches once and that was years ago, but I'd check to make sure you've got the correct number of discs and plates and the their thicknesses are correct. Hopefully you have a workshop manual to guide you in the correct direction.
Reply With Quote
  #3  
Unread 05-10-2020, 04:35 PM
Dave swMN Dave swMN is offline
Member
 
Join Date: Jan 2011
Location: sw Minnesota (Okabena)
Posts: 34
Default

Yes, was surprised when I saw the lack of activity. Guess everyone has their bike up and running fine. I finally remembered that I used the old clutch parts when I tore everything down so I went ahead and ordered new parts.
Reply With Quote
Reply

Tags
clutch

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 06:05 AM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.